Home
1018 Carbon
18-8 Stainless
304 Stainless
316 Stainless
4140 Steel
6061 Aluminum
360 Brass
B7 Alloy Steel
Chromium
Galvanized
Med. Carbon
Oil Finish Steel
Plain Steel
Zinc Plated
Delrin Acetal
Nylon
Polypropylene
Order Online
Eyebolts
Plastic Sheets
Plastic Rods
 

Domestic Selling Policy

 

 

 

 

Component    Wt. %
C 0.38 - 0.43
Cr 0.8 - 1.1
Fe 96.785 - 97.84
Mn 0.7 - 1
Mo 0.15 - 0.25
P Max 0.035
S Max 0.04
Si 0.15 - 0.3
Physical Properties Metric English Comments
Density 7.85 g/cc 0.284 lb/in³  

Mechanical Properties
Hardness, Brinell 277 277  
Hardness, Knoop 302 302  Converted from Brinell hardness.
Hardness, Rockwell B 99 99  Converted from Brinell hardness.
Hardness, Rockwell C 28 28  Converted from Brinell hardness.
Hardness, Vickers 292 292  Converted from Brinell hardness.
Tensile Strength, Ultimate 883 MPa 128000 psi  
Tensile Strength, Yield 685 MPa 99400 psi  
Elongation at Break 19.2 % 19.2 %  in 50 mm
Reduction of Area 60.4 % 60.4 %  
Modulus of Elasticity 205 GPa 29700 ksi  Typical for steel
Bulk Modulus 140 GPa 20300 ksi  Typical for steel.
Poisson's Ratio 0.29 0.29  Calculated
Machinability 65 % 65 %  Based on AISI 1212 as 100% machinability.
Shear Modulus 80 GPa 11600 ksi  Typical for steel.

Electrical Properties
Electrical Resistivity 2.2e-005 ohm-cm 2.2e-005 ohm-cm  specimen hardened and tempered; 20°C (68°F)
Electrical Resistivity at Elevated Temperature 2.63e-005 ohm-cm 2.63e-005 ohm-cm  specimen hardened and tempered; 100°C (212°F)
Electrical Resistivity at Elevated Temperature 3.26e-005 ohm-cm 3.26e-005 ohm-cm  specimen hardened and tempered; 200°C (390°F)
Electrical Resistivity at Elevated Temperature 4.75e-005 ohm-cm 4.75e-005 ohm-cm  specimen hardened and tempered; 400°C (750°F)
Electrical Resistivity at Elevated Temperature 6.46e-005 ohm-cm 6.46e-005 ohm-cm  specimen hardened and tempered; 600°C (1110°F)

Thermal Properties
CTE, linear 20°C 12.2 µm/m-°C 6.78 µin/in-°F  0-100°C (32-212°F)
CTE, linear 250°C 13.7 µm/m-°C 7.61 µin/in-°F  20-400°C (68-750°F)
CTE, linear 500°C 14.6 µm/m-°C 8.11 µin/in-°F  20-600°C (68-1110°F)
Specific Heat Capacity at Elevated Temperature 0.473 J/g-°C 0.113 BTU/lb-°F  150-200°C
Specific Heat Capacity at Elevated Temperature 0.519 J/g-°C 0.124 BTU/lb-°F  350-400°C
Specific Heat Capacity at Elevated Temperature 0.561 J/g-°C 0.134 BTU/lb-°F  550-600°C
Thermal Conductivity 42.6 W/m-K 296 BTU-in/hr-ft²-°F  100°C
Thermal Conductivity at Elevated Temperature 33 W/m-K 229 BTU-in/hr-ft²-°F  600°C
Thermal Conductivity at Elevated Temperature 37.7 W/m-K 262 BTU-in/hr-ft²-°F  400°C
Thermal Conductivity at Elevated Temperature 42.2 W/m-K 293 BTU-in/hr-ft²-°F  200°C
 

K-mac Distribution   3821 Clay Ave. SW   Wyoming, MI 49548  Phone/Fax     Email

 

 

 

Circuit Breakers  *  Plastic Shapes  * Pinewood Derby Cars  *  GLTLA-Texas Longhorns  *  Eyebolts